24/7 Free Online Support all over India | Guranteed Lowest Price | All over India Shipping
Functional features
Basic operation :
A. the time Settings
B. boot :
In shutdown state, according to the function the power button long long yellow lights on, machine directly into standby mode after 3 seconds, 10 seconds (if not into other functional automatic shutdown)
C. to turn it off :
On under 10 seconds into the pictures, video recording automatically shut down; Photo finish, 10 seconds Do not use the automatic shutdown; After the video saved automatically power off.
D. video :
In standby mode, long press the function key 3 seconds, yellow lights flashing under 3 after quench, start video, the video, click the function keys, blue lights flashing under 3 quench, at the same time to save a * AVI format video files, and save the video after the automatic shutdown.
E. take photos
In standby mode, click the function keys to take pictures, instructions yellow once again bright lights went out, and save a *. JPG format image files. If (10 seconds No longer take pictures, the machine automatic shutdown)
F low electric automatic shutdown
If detected when using battery power is low, the double lamp exchange flash 3 times after shutdown, will save the current video file before shutdown.
The computer connection
A) the minimum requirements for the system
B) connect the computer to read disk
1. The U disk mode
A. shutdown state, the machine at one end connected to the USB line, and then the other end inserted into the computer USB port.
B. the computer will automatically recognize the new disk drive and install need.
C. after the driver installation, will automatically pop up a window, there is a "VIDEO" folder, open the folder, inside has a subfolder 100 VIDEO, this is for VIDEO, photo data folder.
D. save completed, you can click on the USB device, safely delete exit.
The power charging
1. If did not start the machine when the phone is switched on, normally the battery is in a state without electricity, this time need for charging battery. In order to ensure to achieve the best use state and longer battery life, three new batteries before we strongly suggest to charge at least 4-5 hours, but bear in mind that should not be more than 24 hours.
2. You can use the random distribution of the USB cable to the machune by computer, you can also use the attached power plug in the USB charging directly, usually a time of need about 3 hours.
3. The long blue LED lights on when charging, when filled with yellow LED lights long, yellow lights up need to continue to charge one and a half hours to fully filled with electricity.
4. Such as long time did not use the machine before use, please recharge.
Product parameters
Storage instructions